How to connect the camera to the router when camera prompts "Please scan the QR code on the camera" (AP hotspot connection)

Preparation before configuration

Power on the camera, press and hold the reset button for a few seconds, and then hear the camera prompt "Reset completed". When the camera prompts "Please scan the QR code on the camera and wait for connection" and the (MV+ID/HSC+ID) hotspot signal is found in the WiFi list of the mobile phone, it means that the device is waiting for configuration
The mobile phone opens WLAN and connects the WiFi used to configure the camera network

Open the APP, click the "+" button in the upper right corner of the device list, select [Add Camera]. Scan the QR code on the device with your mobile phone, and continue to operate according to the system prompts. If the QR code is damaged, swipe up the bottom and select [Wi-Fi Camera] - [AP hotspot connection]
Select the WiFi to be configured for the device, enter the WiFi password, and click [Confirm]
Click [Connect AP spot]
Connect to the device hotspot (MV+ID/HSC+ID) in [WLAN] or the WiFi selection interface, and the device will automatically connect to WiFi after returning to the app
Camera prompts "Received configuration information - WiFi connecting - WiFi connection completed" indicates successful configuration, and APP prompts "Added successfully"

Capabilities are adjusted with system versions. Actual usage prevails.

Guide to configure camera network via AP hotspot connection

Power on the camera, press and hold the reset button for a few seconds, and then hear the camera prompt "Reset completed". When the camera prompts "Please scan the QR code on the camera and wait for connection" and the (MV+ID/HSC+ID) hotspot signal is found in the WiFi list of the mobile phone, it means that the device is waiting for configuration
The mobile phone opens WLAN and connects the WiFi used to configure the camera network

Open the APP, click the "+" button in the upper right corner of the device list, select [Add Camera]. Scan the QR code on the device with your mobile phone, and continue to operate according to the system prompts. If the QR code is damaged, swipe up the bottom and select [Wi-Fi Camera] - [AP hotspot connection]
Select the WiFi to be configured for the device, enter the WiFi password, and click [Confirm]
Click [Connect AP spot]
Connect to the device hotspot (MV+ID/HSC+ID) in [WLAN] or the WiFi selection interface, and the device will automatically connect to WiFi after returning to the app
Camera prompts "Received configuration information - WiFi connecting - WiFi connection completed" indicates successful configuration, and APP prompts "Added successfully"

Capabilities are adjusted with system versions. Actual usage prevails.