LogoV380 Pro Docs
LogoV380 Pro Docs
HomepageDocumentation
Device Startup
Network Setting
Software Setting
Real-time Preview
Record & Replay
Cloud Service
Alarm Setting
4G & Solar-powered
Other Questions
NVR Issues
Does the V380 camera support NVRHow to turn on/off Onvif function of V380 cameraHow to change camera encoding formatWhat kind of NVR can connect V380 cameraCan V380 cameras connect to network storage (NAS)How to connect V380 camera to the NVRHow to add cameras to NVRNVR found device IP but failed to connectNVR manual connection methodWhat should you do if only output HD stream or SD streamWhat functions supported after the camera access to the NVR
General Questions
Other QuestionsNVR Issues

How to add cameras to NVR

Step-by-step guide to adding V380 cameras to your NVR system

How to add cameras to NVR

  1. Connect the camera and NVR to the LAN, and add the device through automatic search.

  2. If the NVR does not find the device IP:

    • Please confirm that the camera and NVR are already in the LAN and use the same gateway.

    • Please try to set a static IP for the device.

    • Please log in to the router background to check if there is a restricted connection, such as LAN isolation, blacklist, and other settings.

    • Please try to turn off the router firewall.

  3. Select onvif as the network protocol, and port 8899 as the network port.

Related link: How to set static IP

Capabilities are adjusted with system versions. Actual usage prevails.

How to connect V380 camera to the NVR

Guide to connecting V380 cameras to NVR systems

NVR found device IP but failed to connect

Troubleshooting NVR connection failures with V380 cameras

Table of Contents

How to add cameras to NVR